2x8 actual size, board feet and weight calculator
Nominal lumber sizes describe the rough-sawn dimension before drying and planing. A 2x8 finishes at 1.5 by 7.25 inches, but board feet are still billed on the nominal size.
Douglas fir 530; southern yellow pine 640; spruce 450.
- Board feet per piece
- 10.667
- Total weight
- 90.67
- Weight per piece
- 9.067
- Total linear feet
- 80.0
- Total cost
- 95.00
- Cost per board foot
- 0.891
- Cross-sectional area
- 7016 mm2
Show the working
- Length of each piece = 8
- Number of pieces = 10
- Wood density = 530
- Price per piece = 9.5
- actual_t = 1.5 = 1.5
- actual_w = 7.25 = 7.25
- nominal_t = 2 = 2
- nominal_w = 8 = 8
- Board feet per piece = 2 * 8 * 8 / 12 = 10.6667
- Board feet = 10.6667 * 10 = 106.667
- actual_volume_m3 = 1.5 * 7.25 * 8 * 12 * 0.0254^3 = 0.017 108 1
- Weight per piece = 0.017 108 1 * 530 = 9.067 29
- Total weight = 9.067 29 * 10 = 90.6729
- Total linear feet = 8 * 10 = 80
- Total cost = 9.5 * 10 = 95
- Cost per board foot = 106.667 > 0 ? 95 / 106.667 : 0 = 0.890 625
- Cross-sectional area = 1.5 * 7.25 * 645.16 = 7016.12
Values are shown to six significant figures here; the arithmetic itself runs on exact fractions and is only rounded where a number is printed.
Scenarios & local history
Compare a saved scenario
Recent calculations
The formula
- board feet = nominal thickness x nominal width x length in feet / 12
- weight = actual cross-section x length x density
Board feet use the nominal size, weight uses the actual size. Mixing them up overstates weight by about 25% on dimensional lumber.
Actual sizes are for dry, surfaced-four-sides softwood. Rough-sawn and green lumber run larger.
Wood weight varies with moisture content: freshly cut softwood can be half again as heavy as kiln-dried.
Nominal against actual
| Measure | Nominal | Actual (in) | Actual (mm) |
|---|---|---|---|
| Thickness | 2 in | 1.5 | 38.1 |
| Width | 8 in | 7.25 | 184.1 |
Frequently asked
What are the actual dimensions of a 2x8?
1.5 by 7.25 inches, or 38.1 by 184.1 mm, surfaced and dry.
Why is a 2x8 not actually 2 by 8 inches?
The nominal size is the green, rough-sawn dimension. Drying shrinks it and planing takes off the rest.