7075 aluminum rectangular tube weight calculator

Enter the dimensions of a 7075 aluminum rectangular tube and this works out its volume and weight. Zinc-bearing aerospace alloy: the densest of the common wrought aluminums.

Outside width

Outside height

Wall thickness

Length

Number of pieces

Total weight

1.922 04kg

= Exact 7075 aluminum rectangular tube weight Show in

Weight of one rectangular tube: 1.922 04
Volume of one piece: 684
Weight per metre of length: 1.922 04 kg/m
Density used: 2810 kg/m3

Show the working

Outside width = 80
Outside height = 40
Wall thickness = 3
Length = 1000
Number of pieces = 1
volume_mm3 = (80*40 - (80 - 2*3)*(40 - 2*3)) * 1000 = 684 000
Volume of one piece = 684 000 / 1000 = 684
Density used = 2810 = 2810
Weight of one rectangular tube = 684 000 * 2810 / 1e9 = 1.922 04
Total weight = 1.922 04 * 1 = 1.922 04
Weight per metre of length = 684 000 / 1000 * 1000 * 2810 / 1e9 = 1.922 04

Values are shown to six significant figures here; the arithmetic itself runs on exact fractions and is only rounded where a number is printed.

Scenarios & local history

Compare a saved scenario

Recent calculations

The formula

Volume = (outer area - inner area) x length, ignoring the corner radii
Weight = volume x density, with density = 2810 kg/m3
One cubic millimetre of a material at 1000 kg/m3 weighs exactly one milligram, so the millimetre-to-kilogram step is a shift of the decimal point rather than a rounded factor.

Zinc-bearing aerospace alloy: the densest of the common wrought aluminums.

Dimensions are nominal. Mill tolerances on thickness, and the corner radii on formed sections, both move the real weight by a percent or two.

Every field takes inches or feet as readily as millimetres: change the unit next to it and the conversion is done exactly before the arithmetic starts.

Frequently asked

What is the density of 7075 aluminum?

2810 kg/m3, which is 2.810 g/cm3. Zinc-bearing aerospace alloy: the densest of the common wrought aluminums.

How do you calculate the weight of a 7075 aluminum rectangular tube?

Volume = (outer area - inner area) x length, ignoring the corner radii. Multiply the volume by the density of 7075 aluminum, 2810 kg/m3, taking care that both are in the same unit system.

Can I enter dimensions in inches?

Yes. Each dimension field has its own unit selector, and inch, foot, millimetre, centimetre and metre entries are all converted exactly before anything is multiplied.

Where the numbers come from

Densities are nominal room-temperature values for the grade named, drawn from the usual mill and handbook figures.