copper sheet weight calculator
Enter the dimensions of a copper sheet and this works out its volume and weight. Pure copper at 20 degrees Celsius. C110 electrolytic tough pitch is the usual commercial form.
- Weight of one sheet
- 53.76
- Volume of one piece
- 6000
- Density used
- 8960 kg/m3
Show the working
- Length = 2000
- Width = 1000
- Thickness = 3
- Number of pieces = 1
- volume_mm3 = 2000 * 1000 * 3 = 6 000 000
- Volume of one piece = 6 000 000 / 1000 = 6000
- Density used = 8960 = 8960
- Weight of one sheet = 6 000 000 * 8960 / 1e9 = 53.76
- Total weight = 53.76 * 1 = 53.76
Values are shown to six significant figures here; the arithmetic itself runs on exact fractions and is only rounded where a number is printed.
Scenarios & local history
Compare a saved scenario
Recent calculations
The formula
- Volume = length x width x thickness
- Weight = volume x density, with density = 8960 kg/m3
- One cubic millimetre of a material at 1000 kg/m3 weighs exactly one milligram, so the millimetre-to-kilogram step is a shift of the decimal point rather than a rounded factor.
Pure copper at 20 degrees Celsius. C110 electrolytic tough pitch is the usual commercial form.
Dimensions are nominal. Mill tolerances on thickness, and the corner radii on formed sections, both move the real weight by a percent or two.
Every field takes inches or feet as readily as millimetres: change the unit next to it and the conversion is done exactly before the arithmetic starts.
Frequently asked
What is the density of copper?
8960 kg/m3, which is 8.960 g/cm3. Pure copper at 20 degrees Celsius. C110 electrolytic tough pitch is the usual commercial form.
How do you calculate the weight of a copper sheet?
Volume = length x width x thickness. Multiply the volume by the density of copper, 8960 kg/m3, taking care that both are in the same unit system.
Can I enter dimensions in inches?
Yes. Each dimension field has its own unit selector, and inch, foot, millimetre, centimetre and metre entries are all converted exactly before anything is multiplied.
Where the numbers come from
- Densities are nominal room-temperature values for the grade named, drawn from the usual mill and handbook figures.
Related calculators
- copper square bar weight
- copper square tube weight
- cork block weight
- cork sheet weight
- Douglas fir board weight
- Douglas fir timber weight
- dry sand block weight
- dry sand slab weight
- drywall block weight
- drywall slab weight
- ductile iron angle weight
- ductile iron flat bar weight
- All material weight calculators →