polyurethane pipe weight calculator
Enter the dimensions of a polyurethane pipe and this works out its volume and weight. Solid cast polyurethane elastomer, not foam.
- Weight of one pipe
- 0.531 557
- Volume of one piece
- 442.965
- Weight per metre of length
- 0.531 557 kg/m
- Density used
- 1200 kg/m3
Show the working
- Outside diameter = 50
- Wall thickness = 3
- Length = 1000
- Number of pieces = 1
- volume_mm3 = pi/4 * (50^2 - (50 - 2*3)^2) * 1000 = 442 965
- Volume of one piece = 442 965 / 1000 = 442.965
- Density used = 1200 = 1200
- Weight of one pipe = 442 965 * 1200 / 1e9 = 0.531 557
- Total weight = 0.531 557 * 1 = 0.531 557
- Weight per metre of length = 442 965 / 1000 * 1000 * 1200 / 1e9 = 0.531 557
Values are shown to six significant figures here; the arithmetic itself runs on exact fractions and is only rounded where a number is printed.
Scenarios & local history
Compare a saved scenario
Recent calculations
The formula
- Volume = (pi / 4) x (OD^2 - ID^2) x length, where ID = OD - 2 x wall
- Weight = volume x density, with density = 1200 kg/m3
- One cubic millimetre of a material at 1000 kg/m3 weighs exactly one milligram, so the millimetre-to-kilogram step is a shift of the decimal point rather than a rounded factor.
Solid cast polyurethane elastomer, not foam.
Dimensions are nominal. Mill tolerances on thickness, and the corner radii on formed sections, both move the real weight by a percent or two.
Every field takes inches or feet as readily as millimetres: change the unit next to it and the conversion is done exactly before the arithmetic starts.
Frequently asked
What is the density of polyurethane?
1200 kg/m3, which is 1.200 g/cm3. Solid cast polyurethane elastomer, not foam.
How do you calculate the weight of a polyurethane pipe?
Volume = (pi / 4) x (OD^2 - ID^2) x length, where ID = OD - 2 x wall. Multiply the volume by the density of polyurethane, 1200 kg/m3, taking care that both are in the same unit system.
Can I enter dimensions in inches?
Yes. Each dimension field has its own unit selector, and inch, foot, millimetre, centimetre and metre entries are all converted exactly before anything is multiplied.
Where the numbers come from
- Densities are nominal room-temperature values for the grade named, drawn from the usual mill and handbook figures.