ExactUnits
↑↓ move ↵ open Esc close All shortcuts

Ti-6Al-4V titanium square bar weight calculator

Enter the dimensions of a Ti-6Al-4V titanium square bar and this works out its volume and weight. Grade 5 titanium, the workhorse aerospace alloy.

Total weight
2.768 75kg
= Exact Ti-6Al-4V titanium square bar weight
Weight of one square bar
2.768 75
Volume of one piece
625
Weight per metre of length
2.768 75 kg/m
Density used
4430 kg/m3
Show the working
  1. Side = 25
  2. Length = 1000
  3. Number of pieces = 1
  4. volume_mm3 = 25^2 * 1000 = 625 000
  5. Volume of one piece = 625 000 / 1000 = 625
  6. Density used = 4430 = 4430
  7. Weight of one square bar = 625 000 * 4430 / 1e9 = 2.768 75
  8. Total weight = 2.768 75 * 1 = 2.768 75
  9. Weight per metre of length = 625 000 / 1000 * 1000 * 4430 / 1e9 = 2.768 75

Values are shown to six significant figures here; the arithmetic itself runs on exact fractions and is only rounded where a number is printed.

Scenarios & local history

Compare a saved scenario

Recent calculations

    The formula

    • Volume = side^2 x length
    • Weight = volume x density, with density = 4430 kg/m3
    • One cubic millimetre of a material at 1000 kg/m3 weighs exactly one milligram, so the millimetre-to-kilogram step is a shift of the decimal point rather than a rounded factor.

    Grade 5 titanium, the workhorse aerospace alloy.

    Dimensions are nominal. Mill tolerances on thickness, and the corner radii on formed sections, both move the real weight by a percent or two.

    Every field takes inches or feet as readily as millimetres: change the unit next to it and the conversion is done exactly before the arithmetic starts.

    Frequently asked

    What is the density of Ti-6Al-4V titanium?

    4430 kg/m3, which is 4.430 g/cm3. Grade 5 titanium, the workhorse aerospace alloy.

    How do you calculate the weight of a Ti-6Al-4V titanium square bar?

    Volume = side^2 x length. Multiply the volume by the density of Ti-6Al-4V titanium, 4430 kg/m3, taking care that both are in the same unit system.

    Can I enter dimensions in inches?

    Yes. Each dimension field has its own unit selector, and inch, foot, millimetre, centimetre and metre entries are all converted exactly before anything is multiplied.

    Where the numbers come from

    • Densities are nominal room-temperature values for the grade named, drawn from the usual mill and handbook figures.

    Related calculators

    Settings

    Theme

    System follows your operating system and changes with it.

    Text size
    High contrast

    Maximises text and border contrast and removes the grid background.

    Graph-paper background
    Round to
    Notation
    Thousands separators
    Decimal mark
    Nearest fraction

    Shows the result as the nearest tape-measure fraction, with the error it costs.

    Accessibility & interaction
    Reduce motion Stops interface animations even when the operating system does not.
    Underline links Keeps links visually distinct without relying on colour.
    Larger touch targets Makes buttons and form controls easier to tap.
    Shorter reading lines Limits article width for easier scanning.
    Monochrome display Removes colour as an information cue.
    Always-visible focus Makes the keyboard focus ring persistent and stronger.
    Verbose screen-reader results Announces the complete conversion equation.
    Sticky action bars Keeps converter and calculator actions within reach.
    Select values on focus Replaces a value immediately when you start typing.
    Left-handed mobile layout Moves key mobile actions toward the left thumb.
    Your data

    Settings, recent conversions and favourites live in this browser only. Nothing is sent anywhere.

    Offline library