teak timber weight calculator

Enter the dimensions of a teak timber and this works out its volume and weight. Air-dry at about 12% moisture content.

Length

Width

Height

Number of pieces

Total weight

13.1kg

= Exact teak timber weight Show in

Weight of one timber: 13.1
Volume of one piece: 20 000
Density used: 655 kg/m3

Show the working

Length = 1000
Width = 200
Height = 100
Number of pieces = 1
volume_mm3 = 1000 * 200 * 100 = 20 000 000
Volume of one piece = 20 000 000 / 1000 = 20 000
Density used = 655 = 655
Weight of one timber = 20 000 000 * 655 / 1e9 = 13.1
Total weight = 13.1 * 1 = 13.1

Values are shown to six significant figures here; the arithmetic itself runs on exact fractions and is only rounded where a number is printed.

Scenarios & local history

Compare a saved scenario

Recent calculations

The formula

Volume = length x width x height
Weight = volume x density, with density = 655 kg/m3
One cubic millimetre of a material at 1000 kg/m3 weighs exactly one milligram, so the millimetre-to-kilogram step is a shift of the decimal point rather than a rounded factor.

Air-dry at about 12% moisture content.

Dimensions are nominal. Mill tolerances on thickness, and the corner radii on formed sections, both move the real weight by a percent or two.

Every field takes inches or feet as readily as millimetres: change the unit next to it and the conversion is done exactly before the arithmetic starts.

Frequently asked

What is the density of teak?

655 kg/m3, which is 0.655 g/cm3. Air-dry at about 12% moisture content.

How do you calculate the weight of a teak timber?

Volume = length x width x height. Multiply the volume by the density of teak, 655 kg/m3, taking care that both are in the same unit system.

Can I enter dimensions in inches?

Yes. Each dimension field has its own unit selector, and inch, foot, millimetre, centimetre and metre entries are all converted exactly before anything is multiplied.

Where the numbers come from

Densities are nominal room-temperature values for the grade named, drawn from the usual mill and handbook figures.