zinc flat bar weight calculator
Enter the dimensions of a zinc flat bar and this works out its volume and weight. Pure zinc. ZAMAK die-casting alloys run 6600-6800.
- Weight of one flat bar
- 2.142
- Volume of one piece
- 300
- Weight per metre of length
- 2.142 kg/m
- Density used
- 7140 kg/m3
Show the working
- Width = 50
- Thickness = 6
- Length = 1000
- Number of pieces = 1
- volume_mm3 = 50 * 6 * 1000 = 300 000
- Volume of one piece = 300 000 / 1000 = 300
- Density used = 7140 = 7140
- Weight of one flat bar = 300 000 * 7140 / 1e9 = 2.142
- Total weight = 2.142 * 1 = 2.142
- Weight per metre of length = 300 000 / 1000 * 1000 * 7140 / 1e9 = 2.142
Values are shown to six significant figures here; the arithmetic itself runs on exact fractions and is only rounded where a number is printed.
Scenarios & local history
Compare a saved scenario
Recent calculations
The formula
- Volume = width x thickness x length
- Weight = volume x density, with density = 7140 kg/m3
- One cubic millimetre of a material at 1000 kg/m3 weighs exactly one milligram, so the millimetre-to-kilogram step is a shift of the decimal point rather than a rounded factor.
Pure zinc. ZAMAK die-casting alloys run 6600-6800.
Dimensions are nominal. Mill tolerances on thickness, and the corner radii on formed sections, both move the real weight by a percent or two.
Every field takes inches or feet as readily as millimetres: change the unit next to it and the conversion is done exactly before the arithmetic starts.
Frequently asked
What is the density of zinc?
7140 kg/m3, which is 7.140 g/cm3. Pure zinc. ZAMAK die-casting alloys run 6600-6800.
How do you calculate the weight of a zinc flat bar?
Volume = width x thickness x length. Multiply the volume by the density of zinc, 7140 kg/m3, taking care that both are in the same unit system.
Can I enter dimensions in inches?
Yes. Each dimension field has its own unit selector, and inch, foot, millimetre, centimetre and metre entries are all converted exactly before anything is multiplied.
Where the numbers come from
- Densities are nominal room-temperature values for the grade named, drawn from the usual mill and handbook figures.
Related calculators
- zinc hex bar weight
- zinc rectangular tube weight
- zinc round bar weight
- zinc round tube weight
- zinc sheet weight
- zinc square bar weight
- zinc square tube weight
- 1100 aluminum angle weight
- 1100 aluminum flat bar weight
- 1100 aluminum hex bar weight
- 1100 aluminum rectangular tube weight
- 1100 aluminum round bar weight
- All material weight calculators →